Anchor PDAs and Accounts

Summary #

• The seeds and bump constraints are used to initialize and validate PDA accounts in Anchor
• The init_if_needed constraint is used to conditionally initialize a new account
• The realloc constraint is used to reallocate space on an existing account
• The close constraint is used to close an account and refund its rent

Lesson #

In this lesson you'll learn how to work with PDAs, reallocate accounts, and close accounts in Anchor.

Recall that Anchor programs separate instruction logic from account validation. Account validation primarily happens within structs that represent the list of accounts needed for a given instruction. Each field of the struct represents a different account, and you can customize the validation performed on the account using the #[account(...)] attribute macro.

In addition to using constraints for account validation, some constraints can handle repeatable tasks that would otherwise require a lot of boilerplate inside our instruction logic. This lesson will introduce the seeds, bump, realloc, and close constraints to help you initialize and validate PDAs, reallocate accounts, and close accounts.

PDAs with Anchor #

Recall that PDAs are derived using a list of optional seeds, a bump seed, and a program ID. Anchor provides a convenient way to validate a PDA with the seeds and bump constraints.

#[derive(Accounts)]
struct ExampleAccounts {
  #[account(
    seeds = [b"example_seed"],
    bump
  )]
  pub pda_account: Account<'info, AccountType>,
}

During account validation, Anchor will derive a PDA using the seeds specified in the seeds constraint and verify that the account passed into the instruction matches the PDA found using the specified seeds.

When the bump constraint is included without specifying a specific bump, Anchor will default to using the canonical bump (the first bump that results in a valid PDA). In most cases you should use the canonical bump.

You can access other fields from within the struct from constraints, so you can specify seeds that are dependent on other accounts like the signer's public key.

You can also reference the deserialized instruction data if you add the #[instruction(...)] attribute macro to the struct.

For example, the following example shows a list of accounts that include pda_account and user. The pda_account is constrained such that the seeds must be the string "example_seed," the public key of user, and the string passed into the instruction as instruction_data.

#[derive(Accounts)]
#[instruction(instruction_data: String)]
pub struct Example<'info> {
    #[account(
        seeds = [b"example_seed", user.key().as_ref(), instruction_data.as_ref()],
        bump
    )]
    pub pda_account: Account<'info, AccountType>,
    #[account(mut)]
    pub user: Signer<'info>
}

If the pda_account address provided by the client doesn't match the PDA derived using the specified seeds and the canonical bump, then the account validation will fail.

Use PDAs with the init constraint #

You can combine the seeds and bump constraints with the init constraint to initialize an account using a PDA.

Recall that the init constraint must be used in combination with the payer and space constraints to specify the account that will pay for account initialization and the space to allocate on the new account. Additionally, you must include system_program as one of the fields of the account validation struct.

#[derive(Accounts)]
pub struct InitializePda<'info> {
    #[account(
        init,
        seeds = [b"example_seed", user.key().as_ref()],
        bump,
        payer = user,
        space = 8 + 8
    )]
    pub pda_account: Account<'info, AccountType>,
    #[account(mut)]
    pub user: Signer<'info>,
    pub system_program: Program<'info, System>,
}
 
#[account]
pub struct AccountType {
    pub data: u64,
}

When using init for non-PDA accounts, Anchor defaults to setting the owner of the initialized account to be the program currently executing the instruction.

However, when using init in combination with seeds and bump, the owner must be the executing program. This is because initializing an account for the PDA requires a signature that only the executing program can provide. In other words, the signature verification for the initialization of the PDA account would fail if the program ID used to derive the PDA did not match the program ID of the executing program.

When determining the value of space for an account initialized and owned by the executing Anchor program, remember that the first 8 bytes are reserved for the account discriminator. This is an 8-byte value that Anchor calculates and uses to identify the program account types. You can use this reference to calculate how much space you should allocate for an account.

Seed inference #

The account list for an instruction can get really long for some programs. To simplify the client-side experience when invoking an Anchor program instruction, we can turn on seed inference.

Seed inference adds information about PDA seeds to the IDL so that Anchor can infer PDA seeds from existing call-site information. In the previous example, the seeds are b"example_seed" and user.key(). The first is static and therefore known, and the second is known because user is the transaction signer.

If you use seed inference when building your program, then as long as you're calling the program using Anchor, you don't need to explicitly derive and pass in the PDA. Instead, the Anchor library will do it for you.

You can turn on seed inference in the Anchor.toml file with seeds = true under [features].

[features]
seeds = true

Use the #[instruction(...)] attribute macro #

Let's briefly look at the #[instruction(...)] attribute macro before moving on. When using #[instruction(...)], the instruction data you provide in the list of arguments must match and be in the same order as the instruction arguments. You can omit unused arguments at the end of the list, but you must include all arguments up until the last one you will be using.

For example, imagine an instruction has arguments input_one, input_two, and input_three. If your account constraints need to reference input_one and input_three, you need to list all three arguments in the #[instruction(...)] attribute macro.

However, if your constraints only reference input_one and input_two, you can omit input_three.

pub fn example_instruction(
    ctx: Context<Example>,
    input_one: String,
    input_two: String,
    input_three: String,
) -> Result<()> {
    ...
    Ok(())
}
 
#[derive(Accounts)]
#[instruction(input_one:String, input_two:String)]
pub struct Example<'info> {
    ...
}

Additionally, you will get an error if you list the inputs in the incorrect order:

#[derive(Accounts)]
#[instruction(input_two:String, input_one:String)]
pub struct Example<'info> {
    ...
}

Init-if-needed #

Anchor provides an init_if_needed constraint that can be used to initialize an account if the account has not already been initialized.

This feature is gated behind a feature flag to make sure you are intentional about using it. For security reasons, it's smart to avoid having one instruction branch into multiple logic paths. And as the name suggests, init_if_needed executes one of two possible code paths depending on the state of the account in question.

When using init_if_needed, you need to make sure to properly protect your program against re-initialization attacks. You need to include checks in your code that check that the initialized account cannot be reset to its initial settings after the first time it was initialized.

To use init_if_needed, you must first enable the feature in Cargo.toml.

[dependencies]
anchor-lang = { version = "0.25.0", features = ["init-if-needed"] }

Once you’ve enabled the feature, you can include the constraint in the #[account(…)] attribute macro. The example below demonstrates using the init_if_needed constraint to initialize a new associated token account if one does not already exist.

#[program]
mod example {
    use super::*;
    pub fn initialize(ctx: Context<Initialize>) -> Result<()> {
        Ok(())
    }
}
 
#[derive(Accounts)]
pub struct Initialize<'info> {
    #[account(
        init_if_needed,
        payer = payer,
        associated_token::mint = mint,
        associated_token::authority = payer
    )]
    pub token_account: Account<'info, TokenAccount>,
    pub mint: Account<'info, Mint>,
     #[account(mut)]
    pub payer: Signer<'info>,
    pub system_program: Program<'info, System>,
    pub token_program: Program<'info, Token>,
    pub associated_token_program: Program<'info, AssociatedToken>,
    pub rent: Sysvar<'info, Rent>,
}

When the initialize instruction is invoked in the previous example, Anchor will check if the token_account exists and initialize it if it does not. If it already exists, then the instruction will continue without initializing the account. Just as with the init constraint, you can use init_if_needed in conjunction with seeds and bump if the account is a PDA.

Realloc #

The realloc constraint provides a simple way to reallocate space for existing accounts.

The realloc constraint must be used in combination with the following constraints:

• mut - the account must be set as mutable
• realloc::payer - the account to subtract or add lamports to depending on whether the reallocation is decreasing or increasing account space
• realloc::zero - boolean to specify if new memory should be zero initialized

As with init, you must include system_program as one of the accounts in the account validation struct when using realloc.

Below is an example of reallocating space for an account that stores a data field of type String.

#[derive(Accounts)]
#[instruction(instruction_data: String)]
pub struct ReallocExample<'info> {
    #[account(
        mut,
        seeds = [b"example_seed", user.key().as_ref()],
        bump,
        realloc = 8 + 4 + instruction_data.len(),
        realloc::payer = user,
        realloc::zero = false,
    )]
    pub pda_account: Account<'info, AccountType>,
    #[account(mut)]
    pub user: Signer<'info>,
    pub system_program: Program<'info, System>,
}
 
#[account]
pub struct AccountType {
    pub data: String,
}

Notice that realloc is set to 8 + 4 + instruction_data.len(). This breaks down as follows:

• 8 is for the account discriminator
• 4 is for the 4 bytes of space that BORSH uses to store the length of the string
• instruction_data.len() is the length of the string itself

If the change in account data length is additive, lamports will be transferred from the realloc::payer to the account to maintain rent exemption. Likewise, if the change is subtractive, lamports will be transferred from the account back to the realloc::payer.

The realloc::zero constraint is required to determine whether the new memory should be zero initialized after reallocation. This constraint should be set to true in cases where you expect the memory of an account to shrink and expand multiple times. That way you zero out space that would otherwise show as stale data.

Close #

The close constraint provides a simple and secure way to close an existing account.

The close constraint marks the account as closed at the end of the instruction’s execution by setting its discriminator to the CLOSED_ACCOUNT_DISCRIMINATOR and sends its lamports to a specified account. Setting the discriminator to a special variant makes account revival attacks (where a subsequent instruction adds the rent exemption lamports again) impossible. If someone tries to reinitialize the account, the reinitialization will fail the discriminator check and be considered invalid by the program.

The example below uses the close constraint to close the data_account and sends the lamports allocated for rent to the receiver account.

pub fn close(ctx: Context<Close>) -> Result<()> {
    Ok(())
}
 
#[derive(Accounts)]
pub struct Close<'info> {
    #[account(mut, close = receiver)]
    pub data_account: Account<'info, AccountType>,
    #[account(mut)]
    pub receiver: Signer<'info>
}

Lab #

Let’s practice the concepts we’ve gone over in this lesson by creating a Movie Review program using the Anchor framework.

This program will allow users to:

• Use a PDA to initialize a new movie review account to store the review
• Update the content of an existing movie review account
• Close an existing movie review account

anchor init anchor-movie-review-program

use anchor_lang::prelude::*;
 
declare_id!("Fg6PaFpoGXkYsidMpWTK6W2BeZ7FEfcYkg476zPFsLnS");
 
#[program]
pub mod anchor_movie_review_program {
    use super::*;
 
    pub fn initialize(ctx: Context<Initialize>) -> Result<()> {
        Ok(())
    }
}
 
#[derive(Accounts)]
pub struct Initialize {}

use anchor_lang::prelude::*;
 
declare_id!("Fg6PaFpoGXkYsidMpWTK6W2BeZ7FEfcYkg476zPFsLnS");
 
#[program]
pub mod anchor_movie_review_program {
    use super::*;
 
}

use anchor_lang::prelude::*;
 
declare_id!("Fg6PaFpoGXkYsidMpWTK6W2BeZ7FEfcYkg476zPFsLnS");
 
#[program]
pub mod anchor_movie_review_program {
    use super::*;
 
}
 
#[account]
pub struct MovieAccountState {
    pub reviewer: Pubkey,    // 32
    pub rating: u8,          // 1
    pub title: String,       // 4 + len()
    pub description: String, // 4 + len()
}

/*
    For the MovieAccountState account, since it is dynamic, we implement the Space trait to calculate the space required for the account.
    We add the STRING_LENGTH_PREFIX twice to the space to account for the title and description string prefix.
    We need to add the length of the title and description to the space upon initialization.
 */
impl Space for MovieAccountState {
    const INIT_SPACE: usize = ANCHOR_DISCRIMINATOR + PUBKEY_SIZE + U8_SIZE + STRING_LENGTH_PREFIX + STRING_LENGTH_PREFIX;
}

#[error_code]
enum MovieReviewError {
    #[msg("Rating must be between 1 and 5")]
    InvalidRating,
    #[msg("Movie Title too long")]
    TitleTooLong,
    #[msg("Movie Description too long")]
    DescriptionTooLong,
}

#[program]
pub mod anchor_movie_review_program{
    use super::*;
 
    pub fn add_movie_review(
        ctx: Context<AddMovieReview>,
        title: String,
        description: String,
        rating: u8,
    ) -> Result<()> {
	// We require that the rating is between 1 and 5
        require!(rating >= MIN_RATING && rating <= MAX_RATING, MovieReviewError::InvalidRating);
 
        // We require that the title is not longer than 20 characters
        require!(title.len() <= MAX_TITLE_LENGTH, MovieReviewError::TitleTooLong);
 
        // We require that the description is not longer than 50 characters
        require!(description.len() <= MAX_DESCRIPTION_LENGTH, MovieReviewError::DescriptionTooLong);
 
        msg!("Movie Review Account Created");
        msg!("Title: {}", title);
        msg!("Description: {}", description);
        msg!("Rating: {}", rating);
 
        let movie_review = &mut ctx.accounts.movie_review;
        movie_review.reviewer = ctx.accounts.initializer.key();
        movie_review.title = title;
        movie_review.rating = rating;
        movie_review.description = description;
        Ok(())
    }
}

#[derive(Accounts)]
#[instruction(title:String, description:String)]
pub struct AddMovieReview<'info> {
    #[account(
        init,
        seeds = [title.as_bytes(), initializer.key().as_ref()],
        bump,
        payer = initializer,
        space = MovieAccountState::INIT_SPACE + title.len() + description.len() // We add the length of the title and description to the init space
    )]
    pub movie_review: Account<'info, MovieAccountState>,
    #[account(mut)]
    pub initializer: Signer<'info>,
    pub system_program: Program<'info, System>,
}

#[program]
pub mod anchor_movie_review_program {
    use super::*;
 
		...
 
    pub fn update_movie_review(
        ctx: Context<UpdateMovieReview>,
        title: String,
        description: String,
        rating: u8,
    ) -> Result<()> {
        msg!("Movie review account space reallocated");
        msg!("Title: {}", title);
        msg!("Description: {}", description);
        msg!("Rating: {}", rating);
 
        let movie_review = &mut ctx.accounts.movie_review;
        movie_review.rating = rating;
        movie_review.description = description;
 
        Ok(())
    }
 
}

#[derive(Accounts)]
#[instruction(title:String, description:String)]
pub struct UpdateMovieReview<'info> {
    #[account(
        mut,
        seeds = [title.as_bytes(), initializer.key().as_ref()],
        bump,
        realloc = MovieAccountState::INIT_SPACE + title.len() + description.len(), // We add the length of the title and description to the init space
        realloc::payer = initializer,
        realloc::zero = true,
    )]
    pub movie_review: Account<'info, MovieAccountState>,
    #[account(mut)]
    pub initializer: Signer<'info>,
    pub system_program: Program<'info, System>,
}

#[program]
pub mod anchor_movie_review_program {
    use super::*;
 
		...
 
    pub fn delete_movie_review(_ctx: Context<DeleteMovieReview>, title: String) -> Result<()> {
        msg!("Movie review for {} deleted", title);
        Ok(())
    }
 
}

#[derive(Accounts)]
#[instruction(title: String)]
pub struct DeleteMovieReview<'info> {
    #[account(
        mut,
        seeds=[title.as_bytes(), initializer.key().as_ref()],
        bump,
        close=initializer
    )]
    pub movie_review: Account<'info, MovieAccountState>,
    #[account(mut)]
    pub initializer: Signer<'info>,
    pub system_program: Program<'info, System>
}

import * as anchor from "@coral-xyz/anchor";
import { Program } from "@coral-xyz/anchor";
import { expect } from "chai";
import { AnchorMovieReviewProgram } from "../target/types/anchor_movie_review_program";
 
describe("anchor-movie-review-program", () => {
  // Configure the client to use the local cluster.
  const provider = anchor.AnchorProvider.env();
  anchor.setProvider(provider);
 
  const program = anchor.workspace
    .AnchorMovieReviewProgram as Program<AnchorMovieReviewProgram>;
 
  const movie = {
    title: "Just a test movie",
    description: "Wow what a good movie it was real great",
    rating: 5,
  };
 
  const [moviePda] = anchor.web3.PublicKey.findProgramAddressSync(
    [Buffer.from(movie.title), provider.wallet.publicKey.toBuffer()],
    program.programId,
  );
 
  it("Movie review is added`", async () => {});
 
  it("Movie review is updated`", async () => {});
 
  it("Deletes a movie review", async () => {});
});

it("Movie review is added`", async () => {
  // Add your test here.
  const tx = await program.methods
    .addMovieReview(movie.title, movie.description, movie.rating)
    .rpc();
 
  const account = await program.account.movieAccountState.fetch(moviePda);
  expect(movie.title === account.title);
  expect(movie.rating === account.rating);
  expect(movie.description === account.description);
  expect(account.reviewer === provider.wallet.publicKey);
});

it("Movie review is updated`", async () => {
  const newDescription = "Wow this is new";
  const newRating = 4;
 
  const tx = await program.methods
    .updateMovieReview(movie.title, newDescription, newRating)
    .rpc();
 
  const account = await program.account.movieAccountState.fetch(moviePda);
  expect(movie.title === account.title);
  expect(newRating === account.rating);
  expect(newDescription === account.description);
  expect(account.reviewer === provider.wallet.publicKey);
});

it("Deletes a movie review", async () => {
  const tx = await program.methods.deleteMovieReview(movie.title).rpc();
});

  anchor-movie-review-program
    ✔ Movie review is added` (139ms)
    ✔ Movie review is updated` (404ms)
    ✔ Deletes a movie review (403ms)
 
 
  3 passing (950ms)

Challenge #

Now it’s your turn to build something independently. Equipped with the concepts introduced in this lesson, try to recreate the Student Intro program that we've used before using the Anchor framework.

The Student Intro program is a Solana Program that lets students introduce themselves. The program takes a user's name and a short message as the instruction data and creates an account to store the data onchain.

Using what you've learned in this lesson, build out this program. The program should include instructions to:

1. Initialize a PDA account for each student that stores the student's name and their short message
2. Update the message on an existing account
3. Close an existing account

Try to do this independently if you can! But if you get stuck, feel free to reference the solution code.